0$
Total: 0$
Model 511-6968-00
Stern 24 volt, 12 RPM motor and connector assembly. Fits PRO , LE and Premium models...
Model 520-5344-00
Stern ball trough emitter board for SPIKE.
Model 520-7001-00
Stern pinball machine SPIKE II system serial opto receiver extension node board. &nb...
Model 180-5164-01
Double contact leaf switch and capacitor assembly.
Model 520-6967-72
Spike system cabinet node board. This replaces 520-6967-00.
Model 502-6951-00
Cable assembly used to convert shaker assembly to fit Stern Spike Systems.
Model 090-5020-30-ND
Data East / Sega / Stern single winding flipper solenoid coil with diode. Specificatio...
Model 545-5411-00
Nylon coil sleeve (plastic tubing) is the most commonly used size on all brands of pinb...
Model 545-5076-01
Nylon coil sleeve 1/2 OD shaft x 1-5/8 inch long with 1/8 inch flange
Model 545-5388-00
Coil sleeve - 2-3/16 inch long x 1/2 inch diameter.
Model 545-5847-00
1/2 OD shaft x 2.69 inch overall length coil sleeve with 0.187 inch shoulder (extension...
Model 515-6308-01
Stern Coil stop assembly used in flipper assemblies.
Model 502-6821-00
Fixes bad connection in ball trough.
Model TIP102
Common and preferred replacement for TIP120, TIP122, 2N6045 and SE9302 series power Dar...
Model 1N4007
Recommended substitute for coils using 1N4001 and 1N4004. The 1N4007 is more durable wi...
Model 520-6791-01
Stern pinball machine 3 bank in-line drop target opto board. Reference: 520-6791-01
Model 265-5003-02
Spring used in Stern's drop target assemblies.
Model 545-9982-01
Groot plastic jaw for Guardians of the Galaxy pinball.
Model 535-1417-02
Hole guard / Scoop protector for use on Deadpool and The Munsters.
Model 520-8029-00
Small LED Board for Stern SPIKE 2 machines. Replaces 520-7042-00.
Model 520-5333-00
Playfield Tri-Color red/green/blue LED display board for new Stern games. LED PCB boar...
Model 520-5307-00
Playfield single LED display board for new Stern games.
Model 520-6801-00
New updated revision D of the magnet processor board used on Metallica Premium and Limi...
Model 520-5292-00
Bell opto board for late model Stern pinball machines. Reference: 520-5292-00
Model 520-5239-01
Stern pinball machine opto transmitter / receiver amplifier board assembly. Referenc...
Model 500-6775-01
Opto transceiver assembly with cable and connector. New design: functions as a transmit...
Model 520-5082-00
Opto transmitter circuit board used on Sega pinball and Stern SPI pinball machines.
Model 515-6304-03
Plunger and link assembly for Data East/ Sega / Stern flipper assemblies. Reference:...
Model 210053
The record-breaking electronic coin validator The RM5 Evolution coin validator is kn...
Model 210055
Model 520-6996-00
Stern pinball machine SPIKE system serial motor driver node board.
Model 180-5231-00
Slingshot Leaf Switch used on newer Stern.
Model 520-6936-01
Stern pinball machine SPIKE system CPU Node board.
Model 509-1003-01
Stern pinball machine SPIKE II system CPU node board. For use on 50HZ cycle only (Europ...
Model 502-7059-00
Factory recommended Stern shaker motor cabinet node capacitor kit for late model S...
Model 535-7297-02
Black wrinkle powder coated side rails for Pro games. Fits left or right side of t...
Model 090-5044-ND
Generic purpose coil used on Stern, Sega and Data East games.
Model 090-5004-ND
Model 180-5149-00
Normally Closed EOS (end-of-stroke) leaf switch used in Stern flipper assembly.
Model 090-5032-ND
Flipper coil for all newer Stern games. Does not include diode as the diode i...
Model 500-6307-10
Flipper rebuild kit for all Stern pinball machines. This kit includes all mechanical c...
Model 500-6307-00
Model 520-5331-00
Driver board for tri-color General Illumination LED lights on various Stern pinball gam...
Model 502-5027-00
Factory authorized Stern shaker motor kit for late model Stern SAM system pinball ...
Model 502-5027-01
Factory authorized Stern shaker motor kit for SPIKE system pinball machines. Us...
Model 011-5003-00
Stern powersupply for SPIKE1 and SPIKE2 systems. This replaces 011-5001-00.
Model 515-7257-01
Flipper End-of-Stroke switch actuator arm for left side flipper assembly.
Model 515-7257-00
Flipper End-of-Stroke switch actuator arm for right side flipper assembly.
Model IRL540N
Mosfet transistor driver N channel 100V - 30A in a TO-220 package. Reference: IRL54...