Parts4Pinballs

Large DMD (192 X 64) Optional Enhancement Kit
[500-6326-00]

In stock: Yes

The Large Dot Matrix Display (192 X 64) Board (520-5075-00) may Blank-Out and/or Resets intermittently. In normal operation, do not confuse a momentary "blank" screen inbetween completed functions in the Attract Mode, Game Play and Diagnostics (PortalsÔ Service Menu). Our Display Controller Board (for 192 X 64 Dot Matrixes) (520-5092-01) utilizes a 68000 Micro Processor which runs at 12Mhz. It "likes" its’ 5 volts to be "5 VOLTS" or darn near close. One of the things that typically happens with older (aging) equipment is they begin to develop "bad connections" and Power Supply Lines tend to drop more voltage, leaving less power available for the device it’s running.

We have developed the Large Dot Display (192 X 64) Optional Enhancement Cable Wiring Harness Update Kit (500-6326-00) to improve the efficiency with which the harness supplies current & voltage to the Dot Matrix Display Board (192 X 64) and the Display Controller Board, thus eliminating the Blanking and/or Resetting problem due to old age and/or bad connections.

This "kit" takes less than ten minutes to install and is very inexpensive. We highly recommend using this "kit" if you have one of the aforementioned symptoms.

Ref. Service bulletin #106.

For more information, please visit this products webpage.

Added Thursday 03 August, 2006.

Qty:

Customers who bought this product also purchased

Baywatch - Manual Repro	Williams Flipper Opto Assy	WMS Flipper Coil FL-11629 - Blue
Fiber Yoke for Pop Bumper	Power Pop Bumper Housing - Blue	Blue Flipper Rubber 1/2 x 1-1/2 inches
Flipper Opto Blue Spring Steel Type-2	Maverick - Rubber Drive Belt for Paddle Wheel	TRANSISTOR PNP DARL 100V 8A TO-220